Supply hose without pressure gauge

As is well known in the field of compressed gas, inflating a balloon by connecting it directly to the cylinder of gas charged to 200 atm (atmospheres), besides being not regular by law, may pose a risk to the operator. It is always advisable to use a pressure reducer able to lower the pressure delivered to the right value. In the field of aerostatics the cylinders are of 40 or 50 liters with internal pressure of 200/230 Atm, a considerable value, therefore the operator's attention during inflation is essential for safety at work. TecnoFly 2008, always sensitive to security needs, offers a supply hose complete of professional reducer with standard connector for helium cylinders, for inflating balloons as the TLB 180 and the Balloon Photo System, and in general all aerostatic balloon to be inflated with helium. Thanks to this reducer the pressure in the valve is reduced from 200 to 6 atmospheres avoiding dangerous "whiplash" when disconnecting the hose from the ball. The hose is available in different lengths and can be used for many types of valves, such as those shown in the photos. It is possible to take the hose with or without pressure gauge, depending on your needs. Our hoses work with the "push to inflate" system, that folding in any direction the hose in the vicinity of the metal joint, it activates the valve. Contact us for a quote, we are at your disposal for any clarification. TecnoFly 2008 distributes only quality products.